BIS notifies certain Indian Standards of paints under the Bureau of Indian Standards Rules, 2018

Aug 25, 2020 | by Avantis RegTech Legal Research Team

Loading audio.....

Commercial Compliance

The Bureau of Indian Standards (BIS) on August 19, 2020 notifies certain Indian Standards, established on August 13, 2020 and which shall remain in force till September 12, 2020 under the Bureau of Indian Standards Rules, 2018.

The list of Indian Standards are as follows:

1. IS 101 (Part 1/Sec 7) : 2020/ISO 2811-1 : 2016 Methods of Sampling and Test for Paints, Varnishes and Related Products Part 1 Test on Liquid Paints (General and Physical) Section 7 Mass per 10 Litres – Determination of Density – Pycnometer Method (Fourth Revision)

2. IS 101 (Part 4/Sec 4) : 2020/ISO 2813 : 2014 Methods of Sampling and Test for Paints, Varnishes and Related Products Part 4 Optical Test Section 4 Gloss – Determination of Gloss Value at 20º, 60º and 85º (Fourth Revision)

3. IS 101 (Part 7/Sec 3) : 2020/ISO 3248 : 2016 Methods of Sampling and Test for Paints, Varnishes and Related Products Part 7 Environment Tests on Paint Films Section 3 Determination of the Effect of Heat (Fourth Revision)

4. IS 516 (Part 5/Sec 4) : 2020 Hardened Concrete ─ Method of Test Part 5 Non-Destructive Testing of Concrete Section 4 Rebound Hammer Test (First Revision)

5. IS 516 (Part 8/Sec 1) : 2020 Hardened Concrete ─ Method of Test Part 8 Determination of Modulus of Elasticity Section 1 Static Modulus of Elasticity and Poisson’s Ratio in Compression (First Revision)

6. IS 1168 : 2020 Cube Sugar – Specification (Second Revision)

7. IS 1493 (Part 5) : 2020/ISO 5418-2 : 2006 Methods of Chemical Analysis of Iron Ores Part 5 Determination of Copper Content ─ Flame Atomic Absorption Spectrometric Method (First Revision)

8. IS 1493 (Part 6) : 2020/ISO 13313 : 2017 Methods of Chemical Analysis of Iron Ores Part 6 Determination of Sodium Content ─ Flame Atomic Absorption Spectrometric Method (First Revision)

9. IS 1493 (Part 9) : 2020/ISO 13312 : 2017 Methods of Chemical Analysis of Iron Ores Part 9 Determination of Potassium Content ─ Flame Atomic Absorption Spectrometric Method (First Revision)

10. IS 1528 (Part 19) : 2020/ISO 16835 : 2014 Methods of Sampling and Physical Tests for Refractory Materials Part 19 Determination of Thermal Expansion (First Revision)

11. IS 2631 : 2020 Iso Propyl Alcohol ─ Specification (Second Revision)

12. IS 3069 : 2020 Glossary of Terms, Symbols and Units Relating to Thermal Insulation Materials (Second Revision)

13. IS 3972 (Part 2/Sec 1) : 2020 ISO 28706-1 : 2008- Methods of test for Vitreous Enamelware Part 2 Test Methods Section 1 Resistance to corrosion by dilute acids at room temperature (Second Revision)

14. IS 3972 (Part 2/Sec 3) : 2020 ISO 28706-1 : 2008 Methods of test for Vitreous Enamelware Part 2 Test Methods Section 3 Resistance to boiling acids, boiling liquids, alkaline liquids and their vapours (Second Revision)

15. IS 3972 (Part 2/Sec 5) : 2020 ISO 28706-4 : 2016 Methods of test for Vitreous Enamelware Part 2 Test methods Section 5 Resistance to hot alkali (Second Revision)

16. IS 4955 : 2020 Household laundry Detergent Powders ─ Specification (Fifth Revision)

17. IS 6566 : 2020/ISO 668 : 2020 Series 1 Freight Containers – Classification, Dimensions and Ratings (Fourth Revision)

18. IS 8180 : 2020 Household laundry detergent bars – Specification (Third Revision)

19. IS 9154 : 2020 Method for Determination of Alkali Resistance of Glass (First Revision)

20. IS 9255 : 2020 After-Shave Lotion – Specification (Second Revision)

21. IS 9458 : 2020 Synthetic Detergents for washing woolen and Silk Fabrics – Specification (Second Revision)

22. IS 9749 : 2020 Potash Feldspar and Soda Feldspar for Glass and Ceramic Industry – Specification (Second Revision)

23. IS 11420 (Part 1 to 9) : 2020 Specification for Coir Mats (First Revision)

24. IS 11479 (Part 2) : 2020 Antibacterial Toilet Soap – Specification Part 2 liquid (Second Revision)

25. IS/ISO 12636 : 2018 Graphic Technology – Blankets for Offset Printing (First Revision)

26. IS/ISO 28591 : 2017 Sequential Sampling Plans by Attributes

27. IS/IEC 60079-0 : 2017 Explosive Atmospheres Part 0 Equipment – General Requirements (Third Revision)

[Notification no PUB/3/3/2020-21(54)]


Bookmark

Related Updates



Alternate Text

Get updates on the go on RuleZbook Mobile App.